1106 - Auxiliary Input; 1501 - Wall Base For Connection Of Control Consoles And Music Sources - EGi MILLENIUM 1202 Manual Del Usuario

1 Push button ON/Off
One press turns on and the next press turns off the auxiliary input 1106.
2 On lamp
It lights when the module is activated by pressing the push button ON/OFF or, automatically, when a signal coming from a
previous module is passing through.
3 Volume regulator
To turn up or down the volume level of the auxiliary input.
4 Pilot lamp for volume regulation
It lights only when the module is activated locally, but not when signals coming from other modules are passing through the
auxiliary input. It blinks when the volume level has reached its top.
5 Inlet for audio source
An external audio source (CD player, Smartphone, Tablet, PC, etc.) can be connected here for local use. A wireless
microphone receiver can also be connected here.
NOTE: This sound unit has an activation PIN for MILLENNIUM series amplifiers, through a DC voltage at the
speaker strip output "OUT+".
Wall base for connection of control
consoles and music sources
This wall socket can be used to connect whether a control console or any external audio source to the audio processors 1327 or
0801. The two conections can be used simultaneously.
1 Pilot lamp for RCA signal reception
It lights when the RCA connectors are receiving an audio signal from an external music source which is over the minimum
sensitivity threshold.
2 Input for console
Input type RJ45 for the connection of control consoles 1202 or 0801.
3 Input for external audio source
RCA input for the connection of external audio sources.
Auxiliary Input 1106
1501
1106
1
2
3
4
5
1501
1
1501
2
3
43.