GB
Full cleaning
1
Unplug the juicer.
2
Remove the following parts from the base:
Automatic model (Fig. 27 and Fig. 30)
-
Remove the cone and the splash cover by unscrewing the cone. Remove splash retainer,
reamer-strainer and container.
Semi-automatic model (Fig. 27)
-
Remove the splash cover, reamer, strainer and container.
3
Remove all pulp and seeds from the removed parts.
4
All the removed parts may be washed in a commercial dishwater or hand washed using warm
water and liquid detergent.
5
Wipe the base, motor shaft and splash cover (semi-automatic model) with a clean, soft cloth
and a mild, non abrasive detergent.
Wipe with a dry cloth.
Never put the base under running water and never immerse in water.
6
Reassemble the juicer in the reverse order.
Do not use abrasive products or sponges to clean.
Never use bleach or chlorine-based cleaning
products.
57
Fig. 30