Input rename
INPUT MENU
INPUT RENAME
Use to change the name of the input source displayed when the
input source is selected. Select a name from templates, or enter an
original name.
■ Selecting a name from templates
1
Press
/
source to be renamed.
2
Press
/
key to select a input source
name.
Selectable item: Blu-ray, DVD, DVR, CATV,
Satelite, Game
3
To exit the menu, press
■ Entering an original name
1
Press
/
source to be renamed.
2
Press
ENTER key.
" " appears above the new name display to indicate the
position to be entered.
3
Press
/
key to place the _
(underscore) under the space or the
character you want to edit.
4
Press
/
4)
character.
y
4)
A to Z, 0 to 9, a to z, and symbols (!, ?, <, >, etc.) are available for input.
y
5)
HDMI video signals input to one of the HDMI IN jacks of this unit are
always output from the HDMI OUT (ARC) jack of this unit.
key to select the input
RETURN key.
key to select the input
key to select the desired
5
Repeat steps 3 and 4 to edit other
characters.
6
To complete the setting, press
key.
7
To exit from the menu, press
key.
HDMI setup
Menu: HDMI SETUP
Use to configure the settings related to HDMI signals and HDMI
control function.
■ HDMI control
Sub menu: HDMI CONTROL
Use this function to link this unit and an HDMI control-
compatible TV via HDMI. For details, see "Operating the unit by
TV's remote control (☞p. 18)".
Selectable item: OFF*, ON
"OFF": Disable the control function. The standby power
consumption of this unit decreases.
"ON": Enable the control function.
■ Audio playback component
Sub menu: SUPPORT AUDIO
Use to select a component to play back HDMI audio signals. This
setting is effective when "HDMI CONTROL" is set to "OFF".
Selectable item: YRS-1100*, OTHER
"YRS-1100": Play back the input sound signal.
"OTHER": Play back the equipment connected to HDMI OUT
(ARC) jack.
Setup menu
ENTER
RETURN
5)
39
En