Safety Instructions - Silvercrest KH 2187 Instrucciones De Uso

Safety instructions

• This device is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
device is to be used.
• Children should be supervised to ensure that
they do not play with the device.
• Keep batteries away from children. Children can
put batteries into their mouths and swallow them.
If a battery is swallowed medical assistance must
be sought IMMEDIATELY.
To avoid potentially fatal electric shocks:
• Connect the device only to correctly installed
and earthed mains sockets. Ensure that the rating
of the local power supply tallies completely with
the details given on the rating plate of the device.
• Make sure that the power cable never becomes
wet or damp during operation. Lay the cable such
that it cannot be trapped or otherwise damaged.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• Arrange for Customer Services to repair or replace
connecting cables and/or devices that are not
functioning properly or have been damaged.
• Only use the device in dry rooms.
• NEVER submerse the device in water. Wipe it
only with a slightly damp cloth.
• Ensure that liquids and miscellaneous objects are
never able to penetrate into the device.
• Do not place water-filled receptacles (e.g. flower
vases) on the device.
• Position the device close to an electrical power
socket. Ensure that the power socket is at all times
easily accessible
• To avoid the risks of tripping, do not use an extension
cable. In the event of danger, the plug must be
quickly and easily accessible.
• Do not open the housing or attempt to repair the
device yourself. Should you do so, device safety
can no longer be assured and the warranty will
become void. Repairs are to be carried out ex-
clusively by a specialist firm or the service centre.
Notice regarding separation from
mains-power
The slide switch
device does NOT completely separate it from the
mains power source. Additionally, the device con-
sumes power when in standby-mode. To complete-
ly separate the device from mains-power, the
power plug MUST be removed from the wall socket.
Risk of explosion!
• Do not throw batteries into a fire. Do not recharge
the batteries.
- 27 -
MODE AUTO (AL)/OFF/ON
for this