Remote Control - Bosch PB10-CD Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Press the button again to turn BOSCH SOUND back on.
TO ADJUST VOLUME
1. Turn right (clockwise) VOLUME+ knob on the front panel
1/8th of a turn once to increase the sound level by 1 degree,
and "VOL X" appears on the LCD display.
2. Turn right (clockwise) VOLUME+ knob and hold it, the
volume keeps increasing upward until you select it, and then
release the knob. "VOL XX" goes up rapidly on the LCD
display.
Operating Instructions for Remote Control
1
2
3
4
5
6
7
8
3. Turn left (counterclockwise) VOLUME– knob on the front
panel 1/8th of a turn once to decrease the sound level by 1
degree, and "VOL X" appears on the LCD display.
4. Turn left (counterclockwise) VOLUME– knob and hold it,
the volume keeps decreasing downward until you select it, and
then release the knob. "VOL XX" goes down rapidly on the
LCD display.
5. Press the MUTE button on the remote control to mute the
volume completely. Press it again to return to the select volume
level.
1. VOLUME UP Button – Increase volume.
2. CD MODE Button – Press once to select previous CD track.
Press and hold for 1 second to scan backwards through CD
track.
3. PLAY PAUSE Button – Play or pauses a track.
9
4. VOLUME DOWN Button – Decrease volume.
5. POWER Button – Pressing turns the unit on or off. (Power
outlets are not controlled by power button. Outlets always have
power if the unit is plugged in to a power source.)
6. MODE Button – SELECTS AUX/CD/RADIO.
7. MUTE Button – Mutes volume
8. SIDE CLIP – Slide clip back to attach remote to key chain or
belt hoop.
9. CD MODE Button – Press once to select next CD track.
Press and hold for 1 second to scan forward through CD track.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pb10

Tabla de contenido