Important Safety Information; Impact Wrench - Greenlee H6510A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Electric shock hazard:
This tool is not insulated. When
using this unit near energized elec-
trical lines:
• Use only certified non-conductive
hoses and proper personal protec-
tive equipment.
• Select and maintain the hydraulic
fluid to meet the minimum dielec-
tric standards required by your
safety department.
Failure to observe this warning
could result in severe injury or death.
Greenlee / A Textron Company
SAFETY
ALERT
SYMBOL
Skin injection hazard:
Oil under pressure easily punctures
skin causing serious injury, gan-
grene or death. If you are injured by
escaping oil, seek medical attention
immediately.
• Do not use fingers or hands to
check for leaks.
• Do not hold hose or couplers
while operating the power source.
• Depressurize the hydraulic system
before servicing.
• Use accessories that are approved for impact use
only. Accessories that are not approved for impact
applications can break when used with impact-
type tools.
• Inspect accessories before use. Discard accesso-
ries that have cracks, chips or gauges.
Failure to observe this warning could result in severe
injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Impact Wrench

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

H6510

Tabla de contenido