Safety - Greenlee Shear 30T Manual De Instrucciones

IMPORTANT SAFETY INFORMATION
This symbol is used to call your attention to hazards or
unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message after
the signal word provides information for preventing
or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in severe
injury or death.
Hazards or unsafe practices which, if not avoided, MAY
result in injury or property damage.
Read and understand all of the instruc-
tions and safety information in this
manual before operating or servicing
this tool.
Wear eye protection when operating or
servicing this tool. Failure to wear eye
protection could result in serious eye
injury from flying debris or hydraulic oil.
If operating the tool continuously for
more than 2 hours hearing protection
is recommended. Longterm exposure
to high noise levels could result in
hearing damage.
Greenlee Tools, Inc.

SAFETY

ALERT
SYMBOL
Shear 30T Shearing Station
Strut channel and threaded rod
ends can be sharp. Gloves are
recommended when handling
these materials.
Skin injection hazard. Do not use
hands to check for oil leaks. Oil under
pressure easily punctures skin. If
injured, seek medical attention imme-
diately to remove oil. Failure to observe
this warning could result in serious
injury or death.
Pinch points: Keep hands away from
the cutting unit during the shearing
process. Failure to observe this warning
could result in severe injury or death.
Do not overload cart
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070