Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DWE6423 Traducido De Las Instrucciones Originales

ENGLISH
125 mm (5") PALM GRIP SANDER
DWE6423
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
Pad diameter
Orbits
Orbit ø
Weight
Noise values and vibration values (triax vector sum) according to
EN 60745-2-4:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the
WA
given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
18
Fuses
Europe
U.K. & Ireland
DWE6423
V 230/115
Defi nitions: Safety Guidelines
AC
1
The definitions below describe the level of severity
W 280
for each signal word. Please read the manual and
mm 125
pay attention to these symbols.
-1
min 8,000–12,000
mm 2.6
kg 1.28
dB(A) 80
dB(A) 91
dB(A) 3
m/s² <2.5
m/s² 1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
PALM GRIP SANDER
DWE6423
D WALT declares that these products described
E
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4.
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
please contact D
refer to the back of the manual.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at the following address or
E