Introduction & Features; Safety Instructions - HQ-Power VDPDP134D Manual Del Usuario

VDPDP134D - 6-CHANNEL DMX DIMMER PACK (6 x 10A) WITH LCD
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDPDP134D. This device is a 6-channel dimmer pack. It can be used as a stand alone
device or as a DMX pack, it can also be controlled by an analogue signal. In stand alone mode, there are 12 built-in
programs with adjustable speed. When operated as a DMX pack, it can be controlled by 1 to 6 channels with
addresses between 001 to 512. When operated through an analogue signal (DC 0-10V pulse signal), it is controlled
by 6 channels. Its features include: preheating, circuit brake protection, phase compensation, DMX M/S, etc. Please
read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or
use it and contact your dealer.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Often clearing the memory may cause damage to the memory chip, be careful not to initialise your unit frequency
often to avoid this risk.
• Only use the recommended AC/DC power adapter.
• Keep the original packaging in case you should ever have to return to unit for service.
• Do not spill water or liquids in or onto your amplifier.
• Make sure that the power outlet voltage matches the voltage of your amplifier.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
Avoid the power cord being stepped upon or tripped over.
• Never remove the ground prong from the power cord. This prong is used to reduce the risk of electrical shock in
case of an internal short circuit.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Never remove the cover. There are no user serviceable parts inside.
• This unit is not intended for home use.
• Keep the device away from children and unauthorised users.
• Do not operate this unit in places with excessive humidity and with temperatures over 45°C/113°F and under
2°C/35.6°F
VDPDP134D 3 VELLEMAN