General Guidelines - HQ-Power VDPDP134D Manual Del Usuario

3. General Guidelines

• All modifications of the device are forbidden for safety reasons. All user modifications will void the warranty.
In the unlikely event that the device needs service, contact your dealer.
4. Description
a) Front view
1. 2 x 8 LC Display
Shows the current activities or menu adjustments.
2. 6 Channel LEDs
These LEDs show the activities of the corresponding channels.
3. DMX LED
This LED blinks when a DMX signal is present.
4. 6 Channel buttons
These channel buttons are used to change the intensity of the corresponding channel.
5. Menu button
6. Up button
Press this button to scroll through menus or to increase values.
7. Down button
Press this button to scroll to menus or to decrease values.
8. ESC button
Press this button to go back to the last menu level or to leave the menu system.
In the initial menu, this button is used to reverse the change direction of the channel setting.
9. 6 x Circuit breaker (10A)
b) Rear View
1. Power input
Single-phase input or three-phase output.
2. Schuko socket
3. DMX output
This connector sends a DMX signal to the next DMX device.
4. DMX input
This connector accepts DMX input signals.
5. Analogue input
DC 0-10V pulse signal.
VDPDP134D 4 VELLEMAN