HQ-Power VDPDP134D Manual Del Usuario página 6

PHASE CORRECTION
DMX ADRESS
VDPDP134D
3. If you select "hold" or "analog", you can press the ESC button to exit.
4. If you select Prog. 1-12, press the ESC button, the speed menu is activated.
You can select the chasing speed from 0.1 to 20 seconds using the UP/DOWN
button. After you've finished your setting, press ESC to exit.
1. Press UP/DOWN to scroll to the phase correction menu.
2. Press the menu button to enter the sub menu system. You can use the UP/DOWN button
to select YES/NO.
[YES]: Linear dimming is activated
[NO]: Non-linear dimming is activated.
Press ESC to exit.
1. Press the UP/DOWN button to scroll to the DMX address menu.
6 VELLEMAN