Peaq PPA34BT-B Manual De Instrucciones página 17

Bluetooth
PAIRING
1. Press the
sounds and the LEDs of the
speaker light on. The speaker is
ready for pairing.
2. Activate the Bluetooth
on the audio device. Connect the
Bluetooth
speaker via Bluetooth
3. A short melody will indicate that
both devices are successfully
paired.
4. Unpair at the Bluetooth
to disconnect. A sound indicates
that the Bluetooth
Note:
• Keep the range of 1 meter when
pairing.
• Up to 10 meters reception range
while music playback via Bluetooth
• Before pairing a Bluetooth
source, refer to the AV source user
guide regarding safety instructions
and use with other devices.
_PPA34BT-B_W_171026_V08_HR.indb 17
®
button until a sound
function
®
-AV-source with the
®
pairing.
®
source
®
is deactivated.
®
®
MOBILE PHONE
1. To pick up an incoming call, press
once
2. To end a call, press
again or end the call directly on
your mobile phone.
Note:
Phone calls will always be the top pri-
ority. When an incoming/outgoing call
is being progressed, it actively inter-
rupts the music playback. As soon as
the call has been ended, the music
resumes.
MUSIC PLAYBACK
1. Start the music playback on the
Bluetooth
button at the speaker (if
supported).
2. Press the button
skip title forward or back.
.
®
AV
ENGLISH
button shortly.
button
AV source or press
®
or shortly to
17
26/10/17 2:27 pm