Programmed Playback - Teac SR-L50 Manual Del Usuario

Up to 20 tracks can be programmed in the desired
order.
< Shuffle playback does not work during program
playback.
< Insert a disc and select "CD" before beginning
programming.
1
Press the MEMORY/CLOCK ADJ button in the stop
mode.
"MEMORY" indicator blinks, and "P-01" appears on
the display.
2 Within 10 seconds, press the numeric buttons to
select a track.
Example 1:
To select the track No.5:
Example 2:
To select the track No.23:
< If the numeric buttons aren't pressed within 10
seconds, program mode will be canceled.

Programmed Playback (1)

2
3 Within 10 seconds, press the MEMORY/CLOCK ADJ
button.
The track is programmed, and "P-02" is displayed.
Repeat steps
< You can program up to 20 tracks.
< You can also use the front panel buttons to select a
track number. In this case, press the SKIP/SEARCH
button to select a track number and then press the
MEMORY/CLOCK ADJ button while "MEMORY" is
blinking on the display.
< To cancel the program mode, press the STOP button
(H).
4 When the selection of track numbers is completed,
press the PLAY/PAUSE button (y /J ) to start
program playback.
If the PLAY/PAUSE button (y /J ) isn't pressed
within 10 seconds, the MEMORY indicator will go
off. In that case, press the MEMORY/CLOCK ADJ
button and then press the PLAY/PAUSE button
(y/J) to start program playback.
The programmed contents are kept in memory even
after the FUNCTION button is pressed or the power
is turned off.
1 3
4
2 3
and to program more tracks.
15