Up to 20 tracks can be programmed in the desired
order.
< Shuffle playback does not work during program
playback.
< Insert a disc and select "CD" before beginning
programming.
1
Press the MEMORY/CLOCK ADJ button in the
stop mode.
"MEMORY" indicator blinks, and "P-01" appears
on the display.
2
Within 10 seconds, press the SKIP/SEARCH
button to select a track.
< If the SKIP/SEARCH button isn't pressed within 10
seconds, program mode will be canceled.
3
While "MEMORY" is blinking on the display,
press the MEMORY/CLOCK ADJUST button.
The track is programmed, and "P-02" is displayed.
10
Programmed Playback
1 3
2
4
Repeat step
< You can program up to 20 tracks.
< To cancel the program mode, press the STOP
button (H).
4
When the selection of track numbers has been
finished, press the PLAY/PAUSE button (y/J)
to start program playback.
If the PLAY/PAUSE button isn't pressed within 10
seconds, the MEMORY indicator will go off. In that
case, press the MEMORY/CLOCK ADJ button and
then press the PLAY/PAUSE button to start program
playback.
The programmed contents are kept in memory
even after switching from CD mode to TUNER or
the unit switches from power on to standby.
2
3
and
to program more tracks.