BSVILLAGE EcoPAC 04 Manual De Instrucciones página 23

Error / Protection codes
Timer and timer settings.
To set time
Press one time
To set timer ON/OFF
This feature is only available if parameter n°1 is set to 1.
If not, it's possible to set, but the controller doesn't record the setting.
It's possible to set 3 periods of working time:
•
Period 1 : Timer ON :
Timer OFF : n°1 OFF
•
Period 2 : Timer ON :
Timer OFF : n°2 OFF
•
Period 3 : Timer ON :
Timer OFF : n°3 OFF
Protection / Error
Water Inlet Temperature Sensor error
Water Outlet Temperature Sensor error
Coil Temperature Sensor error
Ambient Temperature Sensor error
Anti-freezing Protection
Compressor Discharge Temperature Sensor error
High Pressure Protection
Low Pressure Protection
Water flow Switch error
Failure of Excessive Water Temperature Difference
Too High Compressor Discharge Temperature
Protection
Communication error
Too low outlet water temperature protection for
cooling mode
M,
Press one time
blink.
It's now possible to set hours
with ▲ or ▼.
n°1 ON
n°2 ON
n°3 ON
M,
hour will Press one time
will blink.
It's now possible to set
minutes with ▲ or ▼.
- 24 -
Error code
P3
P4
P1
P7
PC
P2
E4
P9
PL
P6 / E2
E3
E8
P8
minutes
Confirm with « SET »