Unpacking The Appliance; Operation - Profi Cook PC-EWB 1007 Instrucciones De Servicio

Unpacking the appliance

1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic
film, filler material, cable ties and box packag-
ing.
3. Check that all the parts are in the box.

NOTE:
There may still be dust or production residues on
the appliance. We recommend that you clean the
appliance as described under "Cleaning".

Operation

CAUTION:
Please observe a waiting period of 2 hours before
initial operation and after moving the appliance for
the coolant to settle; otherwise the compressor
can be damaged.
Mains Power Connection
1. Be sure the voltage of the appliance (rating
plate) corresponds with the mains voltage
before connecting to mains power supply.
2. Ensure that the on/off switch (4) on the back of
the appliance is on the " " (off) setting.
3. Connect the appliance to a properly installed
220 - 240 V~, 50 Hz wall outlet.
4. Switch the appliance on using the On/Off
switch. A signal tone will sound.
Using the "Touchscreen"
The appliance is operated through the touchscreen.
Touch the displayed buttons ON / OFF / TIME /
SET, gently with your finger to execute the func-
tions.
Set time and timer

NOTE:
• Execute the settings in rapid succession and
within a few seconds. If you do not enter
anything for 3 seconds, the appliance will
automatically cancel input mode. The times
set thus far are saved.
40

NOTE:
• You can only program the timer through set-
ting the time.
• Touch TIME on the display. You are now in input
mode. The display to be set will flash.
Sequence for setting the time:
1. current hour
2. current minute
3. TIME Switch-on hour
4. TIME Switch-on minute
5. TIME Switch-off hour
6. TIME Switch-off minute
Setting the time:
• To change the time, touch SET once or several
times.
• Always confirm your setting with TIME.
Check the timer setting
If you want to display the programmed switch-on
and switch-off time, touch TIME several times in
succession.
Activate /deactivate timer
• Touch SET. The display is activated:
1. TIME
2. TIME
3. TIME and TIME
• To deactivate the timer, touch SET again.
Making ice cubes
WARNING:
• Only use drinking water without additives!
Additives remain in the water circuit and con-
taminate the appliance.

NOTE:
• For hygienic reasons do not use the ice cubes
from the first cycle.