HQ-Power VDSCD6001 Manual Del Usuario página 6

9. FOLDER / +10
Go to the next/previous folder. On a disc with no folders, use this button to skip 10 tracks at a time.
10. PROG
Programming button (max. 20 tracks):
a. Press PROG to enter the programming mode.
b. Use the SKIP buttons and choose the desired track. Press PROG to confirm.
c. Use the SKIP buttons and choose the next desired track. Press PROG to confirm.
d. Continue programming all your desired tracks.
e. Press PLAY/PAUSE to start the playback.
11. 16% PITCH INDICATOR
This indicator lights when the 16% pitch mode is engaged.
12. PITCH
This button will activate the pitch slider. Alternate between the 8% and 16% pitch by holding the button pressed.
The indicator will indicate the pitch setting.
13. 8% PITCH INDICATOR
This indicator lights when the 8% pitch mode is engaged.
14. PITCH SLIDER
Press this button and move the slider simultaneously to modify the pitch up to 16%. The pitch will not be modified
when the indicator is off.
15. RELAY
Press to start or to close the relay function from the mixer. When the relay indicator is lit, the relay function can be
remotely controlled through the fader function.
16. RELAY INDICATOR
The relay function is enabled when the relay indicator is lit.
17. LCD
See below.
18. CUE INDICATOR
Lights when cue mode is enabled.
19. CUE
Press this button in playback mode to return to the position where the playback started. Hold the button pressed
to erase the cue point.
20. PLAY/PAUSE INDICATOR
This indicator will light when in playback mode and flash in pause mode.
21. PLAY/PAUSE
Press this button to launch or to pause the CD.
22. LOOP IN INDICATOR
This indicator will light while setting a loop starting point.
23. LOOP IN
Press to determine the starting point of the loop.
24. RELOOP
Press to play the loop continuously.
25. LOOP OUT
Press to determine the ending point of the loop.
26. LOOP OUT INDICATOR
This indicator will light while setting a loop ending point.
27. OUTER JOG WHEEL
Turn the outer jog wheel to search through the selected track. The faster you turn, the faster you will move
through the track.
28. INNER JOG WHEEL
This wheel has different functions depending on the selected mode:
a. PAUSE mode: search through the frames. Set a new frame point by turning the jog wheel and by pressing the
play button.
b. PLAYBACK mode: modify the pitch. Turn it in a clockwise direction to increase the pitch, turn it in an
anticlockwise direction to decrease the pitch.
VDSCD6001_v3
6 HQPOWER