TESY LightModel GM 4.7 Instrucciones De Manejo página 8

5. To connect the water heater to your home Wi-Fi network and then to
EN
the Internet, please follow the steps below:
•
Open the Settings menu from the main screen
•
from Outdoor control choose Wi-Fi Scan
•
Select your local wireless Wi-Fi network and the password that you
use to protect it
•
Upon successful connection (30-40 sec.) you will see the message
"Successful connected to the Internet!"
Upon successful connection, please proceed with the other settings.
Note: With some models you may need more time to connect. You
should wait for few minutes before starting the procedure from
point 5 again.
Note: It is recommended to use WPA or WPA2 encryption, and if
your Wi-Fi modem is very old, use WEP encryption.
6. Volume setting * (available for some models)
You have to set a volume in order for the calculator for consumed power
to operate correctly.
•
Choose from the Settings menu > Volume
•
Choose from the drop down menu > the volume of your water heater.
Note: The water heater volume is indicated in the type plate on the
appliance.
•
Press the Save button to confirm the settings.
8
7. Date and time setting:
•
from the Settings menu choose > Time and date
•
from the drop down menu select Sofia, Bulgaria (or another location
depending which country you are in)
•
Press the Submit button to confirm the settings.
8. Choose from the Settings menu >
•
In the Account e-mail field enter the email address that you have
specified and confirmed in your registration on
com. The other two fields Short description and Details are not
obligatory. You can use them to describe the appliance in a meaningful
way.
•
After entering the required parameters, save the settings by pressing the
Save button.
9. Protecting the Wi-Fi network of the water heater is recommended.
•
From the Settings menu choose > Indoor control
•
Slide the Off button until On appears
•
In the Encryption Key field enter a password consisting of 8 to 40
symbols without intervals
•
Press the Submit button to confirm the password.
Note: Once entered the password can be changed through the
application afterwards
You are successfully connected and you have protected your TESY
appliance.
www.mytesy.com
https://www.mytesy.