Power Source - nedis DRWR1000GY Manual De Uso

OPERATING INSTRUCTIONS
1. Power button
2. MIN button
3. Hour button
4. LCD display
5. Power indicator
6. Alarm set button
7. Light button
8. Time set button
9. Band button
10. Volume button

POWER SOURCE

Battery operation
1. Open the battery cover.
2. Insert 2 "AA" size (UM-3) batteries into the battery compartment, making
sure that the batteries are installed with the proper polarities (+ and –).
To prevent possible damage to this radio:
Load new batteries with their polarities (+ and –) aligned correctly.
• Do not apply heat to batteries, or internal short-circuit may occur.
• If this radio is not to be used for a long period of time, remove all batteries
and store them in a cool and dry place.
• Remove dead batteries immediately.
• Do not use old and new batteries together. Do not use different type of
batteries.
• Battery life: If the sound becomes low or distorted, replace batteries with
new ones.
11. MW button
12. Battery compartment
13. Earphone jack
14. Carrying strap
15. FM Button
16. Telescopic antenna
17. DC jack
18. DX/Local switch
19. AM/SW selector switch
2
ENGLISH