Service & Maintenance - Altrad Belle BGN+ Manual Del Operador

The Altrad Belle 'BGN+' is designed to give many years of trouble free operation. It is, however, important that the simple regular
maintenance listed in this section is carried out.
It is recommended that an approved Altrad Belle dealer carries out all major maintenance and repairs. Always use genuine Altrad Belle
replacement parts, the use of spurious parts may void your warranty.
Periodic Mantenance
in on all of the threads. Tighten and then clean any excess sealant . It is important all the parts are tightened, to ensure water does
not penetrate the poker head:
Finally, apply two weld spots to secure the parts do not loose.
5. If you have replaced the switch, ensure the bolts are tightened and the box is watertight.
DIMENSIONS OF WEAR FOR DIAMETERS AND LENGTHS OF THE POKER
a. The minimum dimensions are printed in bold.
b. The dimensions in brackets are the original dimensions.
c. Replace the housing when it reaches the minimum diameter.
d. Replace the tip when it reaches the minimum length.
the original date of purchase. The Altrad Belle warranty is against defects in design, materials and workmanship.
The following are not covered under the Altrad Belle warranty:
operation or user maintenance instruction.
claim, on any machine.
4. Materials and/or labour costs to renew, repair or replace components due to fair wear and tear.
The Altrad Belle and/or their recognised agents, directors, employees or insurers will nor be held liable for consequential or other dam-
ages, losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty claims
For warranty claims:
Altrad Belle Warranty Department,
Sheen, nr. Buxton
Derbyshire
GB.
Service & Maintenance
A
B
Warranty
11
Model Diameter (mm)
BGN+ 35 36
BGN+ 45 40
BGN+ 50 50
BGN+ 60 58
BGN+ 70 65
GB
Length (mm)
345
315
395
420
425
GB