Safety Instructions - Zibro H610 Instrucciones De Uso

SAFETY INSTRUCTIONS

Install the device only when it complies with local regulations, by-laws and standards. The
unit is only suitable for use in dry locations, indoors. Check the mains voltage and
frequency. Connection voltage is 230 V. / 50 Hz.
GENERAL
• Ensure that all windows are closed in order to achieve maximum efficiency.
• The capacity of the humidifier depends on the temperature and the humidity in the room.
• Ensure that the air inlet is kept clean. This prevents unnecessary power consumption
and guarantees optimum efficiency.
• If the ON/OFF button is pushed for the second time, the humidifier will stop 1 minute
later in order to cool down the unit.
IMPORTANT
• The plug must always be easily accessible when the unit is connected. Read
these instructions carefully and follow the instructions.
Before connecting the unit, check the following:
• The voltage supply must correspond with the mains voltage stated on the rating
label.
• The socket and power supply must be suitable for the current stated on the rating
label.
• The plug on the cable of the device must fit into the wall socket.
• The device must be placed on a flat and stable surface.
The electricity supply to the device must be checked by a recognised professional if you
have any doubts regarding the compatibility.
• This device is manufactured according to CE safety standards. Nevertheless, you must
take care, as with any other electrical device.
• Do not cover the air inlet and outlet ports.
• Empty the water reservoir before moving the unit.
• The water in the container should be refreshed every day.
• The inside of the water container should be kept clean.
• Do not turn the device upside down if water is in the container.
• Never allow the device to come into contact with chemicals.
• Never spray the unit with or submerge in water
• Do not insert objects into the openings of the unit.
• Always remove the plug from the electric power supply before cleaning or replacing
the unit or components of the unit.
• Never use an extension cable to connect the device to the electric power supply. If
there is no suitable, earthed wall socket available, have one installed by a recognised
electrician.
• For safety reasons take care when children are in the surrounding of the device, as
4
44