Schedule Starts; Schedule Details - Toro EVOLUTION AG Manual Del Usuario

Schedule Starts

e Schedule Starts function allows you to view the three schedules with all four possible start times.
Step 1 – While in the ADVANCED menu, use the Up
Press SELECT .
Step 2 – Use the Up or Down
Step 3 – Use the Left or Right
press SELECT
– Use the Up or Down
Step 4
will save the changes as well as pressing the SELECT
– Repeat Steps 2 and 3 to edit or add another start time.
Step 5
Step 6 – Place the start time to OFF to remove.
e symbol indicates that the schedule is enabled. See STATUS under SCHEDULE DETAILS in ADVANCED to enable or
Note:
disable Schedules.

Schedule Details

®
e EVOLUTION AG controller has three available watering schedules (A, B and C) and one Auxiliary schedule. Two additional Auxiliary
Schedules can be added using the Smart Connect® Accessories.
Set Maximum Concurrent Schedules
e maximum number of concurrently running schedules is set in Schedule Details.
schedule is not included in the set maximum. You can set a maximum of 1–3 watering schedules to activate at the same time.
Step 1 – While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
to select MAX CONCUR SCHEDS. Press the Right
Step 2 – Use the Up or Down
Press SELECT
is setting is not the maximum number of schedules which are ENABLED, but rather, the maximum number of schedules
Note:
that will operate CONCURRENTLY. E ectively, it is a way to manage the maximum number of irrigation valves that are allowed to open
concurrently.
Review/Edit Schedule Details
Step 1 – While in the ADVANCED menu, use the Up
Step 2 – Use the Up or Down
Step 3 – Use the Up or Down
then press SELECT
Step 4 – Use the Left or Right
arrows to modify the values. Press SELECT
Schedule Settings for SCHEDULE A, B, and C
Set Schedule Status – By default, only Schedule A is enabled. Schedules B, C, and the AUX schedule can
be enabled in this menu section.
Step 1 – Use the Up or Down
– Use the Up or Down
Step 2
Press SELECT
16
or Down
arrows to navigate to the row that the start time is in.
arrows to navigate to start time you want to edit. You can also
until the desired start time is selected.
arrows to enter the desired start time. Moving to another parameter
arrows to set the maximum schedules to activate concurrently.
to save.
or Down
arrows to select the schedule you want to edit, then press SELECT
arrows to select through the menu items you want to edit,
.
arrows to navigate to the parameter and use the Up
to save.
arrows to navigate to the STATUS, then press SELECT
arrows to ENABLE (turn on) or DISABLE (turn o ) the schedule.
to save.
arrows to select the SCHEDULE STARTS.
button.
e default setting is set at 1 schedule.
or Down arrows
arrow or SELECT .
arrows to select SCHEDULE DETAILS, then press SELECT
or Down
.
VALVE RUNTIMES
A B C
04:30A 07:45A OFF
08:00P OFF OFF
OFF OFF OFF
VALVE RUNTIMES
A B C
04:30A 07:45A OFF
08:00P OFF OFF
OFF OFF OFF
e auxiliary
SCHEDULE DETAILS
SCHEDULE A
SCHEDULE B
SCHEDULE C
MAX CONCUR SCHEDS 3
AUX 1
.
.
SCHEDULE DETAILS
MAX SCHEDULES 1
SCHEDULE A
SCHEDULE B
SCHEDULE C
AUX 1
SCHEDULE A
STATUS ENABLED
RESTRICTIONS
MONTHLY ADJUST
ERASE SCHEDULE
MV/PUMP DELAY
VALVE DELAY
MV/PUMP IN DELAY