ET Water SmartBox Generation 4 Serie Guía Para La Instalación página 17

6.)
Copy Program: Once you finish programming one station, you can copy that program to all the other
stations.
a. From Main Menu select 5 to edit then select the station you are copying from then choose 2 to
Copy Program
b. Select the station number you will copy the program to
c. press ENTER
If successful, the display should read "Program for Station 1 copied to Station 2" (where
d.
station 1 is the source of the schedule and station 2 is the destination of the schedule)
Moving Program: Once you've set a program you can move that program to other stations. This
7.)
would be used if you change your landscape or the irrigation system.
*Note: Station 1 is the only station that cannot be moved*
a. From Main Menu select 5 to edit then select the station you are moving from then choose 3 to
Move Program
b. Select the station number you will move the program to
c. press ENTER
If successful, the display should read "Move Completed"
d.
Any changes to Start Times need to be made by editing the Start Time in section 2 and editing the
ATTENTION:
program in section 5. Even if the Start Time changing has the same numerical value that is assigned to the
existing program you need to update the program by removing and then adding the Start Time on each
programmed station. The program start time will not change if this process is not followed.
NOTE: TO CHECK YOUR SETTINGS FOR A STATION, PRESS THE "VIEW PROGRAM" BUTTON WHEN
THE DISPLAY READS "ETWATER OFFLINE," Press 2 ENTER A STATION NUMBER, AND PRESS ENTER.
ETwater Customer Support Services
Customer Support Services offer assistance 7am to 5pm, PST, Monday through Friday, excluding holidays.
Phone: 1.888.685.5505
Alt: 1.415.945.9383
Email: support@etwater.com
14