Technical Data - Topcom MM-1000 Manual De Usuario

4.3 Using the massager
After installing batteries:
• Press the On/Off button (1) to activate the vibration. The massage heads will
illuminate.
• Press the On/Off button (1) again to deactivate the vibration.
4.4 How and where to massage
• Keep the massager still on one of the next spots for approximately 30 seconds
then move it onto the next part that needs massaging.
1. Neck
2. Back
3. Waist
4. Palm
5. Sole
6. Calf
7. Thigh
8. Arm
9. Neck and shoulder
• Apply little pressure at first.
• It is very important that the part you are massaging is relaxed. When you hold a
massager, the shoulder on the side you hold the massager with will tighten.
Therefore you should hold the massager with the opposite hand.
• Never press too hard.
4.5

Technical data

Dimensions (W/H/D)
Weight
Power supply
9
8
7
6
5
90 x 90 x 70 mm
147 g (without batteries)
3 x AAA (1,5V)
TOPCOM MM-1000
1
2
3
4