Luvion SUPREME CONNECT Manual De Instrucciones página 30

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
30
10. Battery compartment - only replace the battery of your monitor with an authorized luvion supreme
connect battery. using a different battery will cause you to void your warranty.
11. Speaker - produces the sound received from the connected baby unit. use the volume buttons (27) to
decrease/increase the sound level.
12. Stand - You can use the stand to place the monitor in an upright position.
13. Reset button - use a paperclip to press this button in the event of a frozen screen. You can then use the
on/off button to switch the parent unit back on.
14. Antenna - sends & receives data to the baby unit.
15. On/Off button
- press and hold this button to switch the parent unit on/off. Briefly press this button
when the parent unit is on to go to the 'sound-only mode' (turning off your screen to save battery).
16. Night light button
' '-Button to remotely (de-)activate the night light of the baby unit (When multiple baby units are in use,
the night light of the unit of which the video is currently displayed on the screen is controlled). the night
light icon ( ') will appear on the screen when the night light of the baby unit is activated.
17. Record button - use this button to capture a video recording. a micro sd-card (see 30, page 7) is
required to capture a recording. When activated, the recording icon will now appear on the screen.
18. Snapshot button
snaphots can be taken (see 30, page 7).
sIde VIeW
19. Wi-fi Bridge connectors - ensures that the parent unit will be correctly placed on the optional Wi-fi
Bridge.
20. Mini USB port - connects to the optional Wi-fi bridge.
21. Lock button - locks the frontal touch interface on the front of the parent unit (monitor) to prevent
accidental changes within settings. a lock icon
22. Quad/Auto button
function enables you to simultaneously observe 4 baby units (cameras). press once to
activate. Press again to auto-switch between connected baby units every 3 seconds.
- our baby units are fitted with a special night light to comfort your child. press the
- use this button to make a snapshot of the video. an sd card is required before any
21
22
23
24
25
26
- the baby monitor is equipped with a quad-camera function. this
sIde VIeW
is begin displayed when active.
27
28
29
30

Publicidad

Tabla de contenido
loading

Tabla de contenido