Menu - Luvion SUPREME CONNECT Manual De Instrucciones

MENU

open the menu of the luvion supreme connect
to change device settings.
> press the menu button on the parent unit to
open the menu.
> Move the joystick to the left/right to select a
submenu.
> press the Joystick to confirm a selection,
marked dark blue, and open a submenu.
> alaRM
menu
the luvion supreme connect has 2 different
alarms, a temperature alert and a timer. use this
submenu to set an alarm and to change the
volume of these alarms.
> Move the joystick to the up/down to select a
submenu.
> press the Joystick to confirm a selection, and
open a submenu.
> > TEMP. alERT RaNgE
menu aLarm
the baby unit (camera) is equipped with a
temperature sensor. You can set a temperature
alert to get notified when the temperature is
either too cold/hot. this feature is not intended
as a substitute for adult supervision.
> Move the joystick to the up and down to
move between low temperature and high
temperature and the on and off buttons.
> Move the joystick to the right to increase the
temperature and to the left to decrease it.
When the low and high temperature are
correctly set:
> to set the alarm navigate to the on button
and press the joystick. to turn off the alarm
navigate to the off button and press the joystick.
LUVION
Premium Baby products
27