CONVERTING THE VACUUM UNIT
USE WITHOUT BAG
Your central vacuum unit was designed for use
with or without disposable bag. Though it is sold
with a bag installed, it can easily be removed,
and the unit modified for use without disposable
bags.
1. To access the bag, unlatch the two clips and
remove the dust receptacle (figure 9).
2. Remove the used bag (figure 10). If it
has been used, seal its opening with the
self-adhesive flap on the bag collar (see
instructions on the bag). Discard the used
bag. If the bag was not utilized, you may wish
to store it for later use.
3. Remove the clamp collar (figure 11). Then,
while grasping both the bag adapter and the
fitting, rotate the adapter so that the small
plastic disc on the fitting is aligned with the
adaptor's slot (figure 12). Remove the bag
adapter (figure 13). Store these parts for
future use, if desired.
4. The vacuum unit is now ready for use
without bags.
Note: this procedure is reversible at any time.
GENERAL INFORMATION
12
Maintenance
figure 9
figure 10
figure 11
figure 12
figure 13