Mvac M35 Manual De Instrucciones página 18

TROUBLESHOOTING
PROBLEM
Vacuum will not start
16
POSSIBLE CAUSE
The electrical power is
not connected properly
Low voltage wire not
connected properly
Faulty vacuum inlet
Unit circuit breaker
is off
In-house circuit breaker
is off
Defective on/off hose
Troubleshooting
CORRECTIVE ACTION
Ensure that the
power cord is plugged
into a dedicated
grounded electrical
outlet, according to
specifications on pages
7 and 8.
Verify the low voltage
wires, make sure they
are properly inserted
into the low voltage
inlet, as per instructions
on page 9.
Start the vacuum unit
from other inlets in your
home, to identify the
defective inlet.
Press the reset button
to reset the unit circuit
breaker. If unit restarts
and automatically shuts
off shortly after, contact
an authorized service
center.
Reset the circuit breaker
in your electrical
panel. Verify that your
central vacuum unit is
connected on a dedicated
grounded circuit (see
pages 7 and 8).
Turn the hose 1/4 turn in
the vacuum inlet. If unit
starts, have the vacuum
hose checked by a
certified service center.