Publicidad
Idiomas disponibles
Idiomas disponibles
BT 1320
1. Carefully remove the plastic cover from the blade. Caution: the blade is very sharp! Always hold it by the
upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down the blade and lock bowl. Always place
the chopper bowl on the anti-slip base.
3. Place the food in the chopper bowl.
4. Place the chopping bowl lid on the chopper bowl.
5. Turn the motor unit on the chopping bowl lid until it locks.
6. Then transfer inching switch and Press switchⅠor switchⅡ to operate the chopper. During processing,
hold the motor unit with on hand and the chopper bowl the other.
7. After use, turn the motor unit off the chopping bowl lid.
8. Then remove the chopping bowl lid. Carefully take out the blade.
9. Carefully take out the blade.
10. Remove the processed food from the chopper bowl.
11. Don't operate hard food for no longer than 10 seconds.
HOW TO USE THE WHISK
Use the whisk only for whipping cream, beating egg whites and mixing sponges and Ready-mix
desserts.
1. Inset the whisk into the whisk holder, and then turn the gear box on the motor unit until it locks.
2. Place the whisk in a vessel and then transfer inching switch and press the switchⅠor switchⅡ
to operate it.
3. Use the whisk for no longer than 2 minute.
4. Turn the gear box off the motor unit after use. Then pull the whisk out of the gear box.
CLEANING
Do not immerse the motor unit, the chopper coupling unit and the whisk coupling
unit in water.
1 Unplug the appliance.
2 Press the release buttons on the motor unit to remove the blender bar or
coupling unit.
3 Disassemble the rest of the parts.
4 Wipe the motor unit, the chopper coupling and the whisk coupling unit with a
moist cloth.
Do not immerse the motor unit, S.s stick unit in water.
1 Unplug the appliance.
2 Press the release buttons on the motor unit to remove the S.s stick.
3 Wipe the motor unit, the S.s stick with a moist cloth.
10
Publicidad
