PIVOT cycles PIVOT SHUTTLE Team XTR Manual Del Usuario página 6

Setting Rebound Damping on the Fox DPX2
Rebound is set from the most open (fully counter-clockwise) posi on.
The rebound se ng is determined by the air pressure in the shock.
Refer to the table below for the suggested rebound se ng. The number in the chart
refers to how many clicks in (clockwise) from the open se ng the rebound should be set.
Setting Air Pressure on the Fox 36 Fork
Fox recommends se ng sag between 15% and 20% of the total fork travel. The Shu le comes with a
160mm fork, so the proper sag measurement is 24.0 - 32.0mm.
The air pressure in the Fox 36 fork should not exceed 8.3 [bar] (120 [psi]).
To achieve the proper sag, reference the chart below for an ini al star ng point.
www.pivotcycles.com service-eu@pivotcycles.com
Open
1
2
3
4
6
7
9
11
12
3.0 [bar] / 43 [psi]
3.2 [bar] / 46 [psi]
3.5 [bar] / 51 [psi]
3.8 [bar] / 55 [psi]
4.1 [bar] / 59 [psi]
4.3 [bar] / 63 [psi]
4.6 [bar] / 67 [psi]
4.9 [bar] / 71 [psi]
5.2 [bar] / 75 [psi]
5.4 [bar] / 79 [psi]
5.7 [bar] / 83 [psi]
6.0 [bar] / 87 [psi]
6.3 [bar] / 91 [psi]
+49 711 4905 9800
BIKE SET-
4