CULUS Elica Guía De Instalación, Uso Y Mantenimiento página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12. Join
the
second
tightening the second and third screws on
each side (counting from the bottom).
Fix the 2 sections in place using 4 screws
(2 per side).
13. Apply 2 casings (supplied) to cover the
fixing points on the lower duct sections
(CAUTION:
CASINGS ARE EASY TO RECOGNISE
BECAUSE THEY ARE NARROWER
AND LESS DEEP).
lower
section
THE
LOWER
by
14. Check all light bulbs to make sure they
are secure in their sockets.
Turn power on in service panel.
Check lights and blower operation per
Care & Use section of this manual.
If range hood does not operate:
Check that the circuit breaker is not
tripped or the house fuse blown.
Disconnect power supply. Check that
wiring is correct.
To get the most efficient use from your
new range hood, read the "Use and Care
Information" section.
Keep your
Use and Care Guide close to range hood
for easy reference.
DUCT
16
Installation Instructions and

Publicidad

Tabla de contenido
loading

Productos relacionados para CULUS Elica

Tabla de contenido