Corghi ERCO X4300 Serie Manual De Uso página 88

6-MOVEMENT pLAY DETECTOR
p1 Actuates movement of the plates from the initial position to the end position along
the Y axis.
p2 Actuates movement of the plates from the initial position to the end position along
the X axis.
p3 Actuates movement of the plates from the initial position to the end position along
the XY axis.
p4 pause. Stops plate movement and holds plates in current position.
Function not currently implemented.
p5 Lamp on/off.
Release button p1 to allow the plates to return automatically to the initial position
along the Y axis
Releasing buttons p2 and p3 have the same effect for X and XY axes respectively.
To perform large movements, press and hold the respective control button (p1, p2 or p3).
To perform small, pulsed movements, press the respective button (p1, p2 or p3) briefly
88
P1 P2 P3 P4 P5
16_2
Operator' s manual