Using The Language On-Screen Display; On-Screen Display; Using The Option; Degaussing The Screen - IBM P260 Manual De Instrucciones

Using the LANGUAGE
screen Display
English, French, German, Spanish, Italian, Dutch, Swedish,
Russian, and Japanese versions of the OSDs are available.
1
Press the button.
The MENU OSD appears.
2
Press the . /> buttons to select "
press the button again.
The LANGUAGE OSD appears.
3
Press the . /> buttons to select the desired language.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• : Russian
• : Japanese
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset to English, press the ? (reset) button while the
OSD is on.
On-
LANGUAGE" and
L ANGUAGE
ENGL I SH
FRANÇA I S
DEUT SCH
ESPAÑOL
I T A L I ANO
NEDER L ANDS
SVENSKA
Customizing Your Monitor

Using the OPTION

Display
The OPTION OSD allows you to manually degauss the
screen, and adjust the OSD position. It also allows you to
lock the controls.

Degaussing the screen

The monitor screen is automatically degaussed
(demagnetized) when the power is turned on.
You can also manually degauss the monitor.
1
Press the button.
The MENU OSD appears.
2
Press the . /> buttons to select "
press the button again.
The OPTION OSD appears.
3
Press the . /> buttons to select "
4
Press the / button.
The screen is degaussed for about 2 seconds.
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
On-screen
EN
OPTION" and
OPT I ON
DEGAUS S
ON
(DEGAUSS)."
13