External Device Connection - Sylvania LC427SSX Manual Del Usuario

No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

External Device Connection

[HDMI Connection]
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio
through a single cable.
e.g.)
I LE 5
C APTER 5
R PEAT A B
BD/DVD recorder
with the HDMI output jack
Note:
• This unit accepts 480i / 480p / 720p / 1080i / 1080p video signals, and 32kHz / 44.1kHz / 48kHz audio signals.
• This unit accepts only 2 channel audio signal (LPCM).
• You need to select "PCM" for the digital audio output of the device you connected or check the HDMI audio setting.
There may be no audio output if you select "Bitstream", etc.
• This unit only accepts signals in compliance with EIA861.
[HDMI-DVI Connection]
Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.
e.g.)
S EREO
PCM
cable receiver or satellite box
with the DVI output jack
Note:
• This unit accepts 480i / 480p / 720p / 1080i / 1080p video signals.
• HDMI-DVI connection requires separate RCA audio connection as well.
• Audio signals are converted from digital to analog for this connection.
• DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.
HDMI cable
HDMI OUT
AUDIO OUT
L R
HDMI-DVI
conversion cable
DVI OUT
or
or
RCA audio cable
English
side or
rear of this unit
rear of this unit
To HDMI1 To H
input jack only inp
EN
9