Proper Use, Device Description - ALFRA TML 200 R Manual De Instrucciones

PROPER USE
The permanent lifting magnet TML 200R is designed to lift ferromagnetic, metallic loads and may only be
used according to its technical data and determination. Proper use includes adherence to the start-up,
operating, environment and maintenance conditions specified by the manufacturer. The user bears sole
responsibility for understanding the operating manual as well as for proper use and maintenance of the
lifting magnet.
DEVICE DESCRIPTION
The TML 200R (Thin Material Lifter) magnet is a switchablelifting magnet with manual actuation designed to
lift and transport ferromagnetic materials. To activate the magnet, push the activation lever (A) into the ON
position until it audibly latches into place. The installed permanent magnet (B) generates a magnetic field
in the lower magnetic plate area (D). Owing to the special design of the TML 200R, this magnetic field is very
compact and develops excellent adhesive force especially on thin materials of less than 10 mm.Care must be
taken that the lever springs back when working on thin materials. The activation lever must be lifted slightly
at its end and returned by 60° into the OFF positionto deactivate the magnet.
A rotatable and pivotable load swivel (C) is situated on the top of the lifting magnet. This load swivel can
be used with a soft eye to attach the lifting magnet to the hook of a crane.The load-bearing capacity of the
lifting magnet is equivalent to 1/3 of the maximum breakaway force of the magnet and thus complies with
the standard safety factor of 3:1.
!
Be sure to read the operation instructions completely before using this magnet for the first time!
A) Activation lever
B) TMC 600R Magnetic base
(41200.R)
C) Rotatable load swivel
D) Magnetic surface
15