Technical Data, Markings - ALFRA TML 200 R Manual De Instrucciones

TECHNICAL DATA
Prod.-No.
Designation
Breakaway force
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to EN 13155
with safety factor 3:1)
Max. load-bearing capacity:
(at 90° inclination of the load
with safety factor 3:1)
Max. load-bearing capacity:
(on round pipes at 0° inclination)
Admissible diameter of
round pipes
Dead weight of the unit
Storage temperature
Operating temperature
MARKINGS ON THE LIFTING MAGNET
Detailed descriptions for the safe handling and proper operating conditions of the TML 200R can be found
on both sides and on top of the lifting magnet. This labeling must not be modified, damaged or removed.
Otherwise the manufacturer cannot be held responsible for any personal injuries, property damage or
accidents resulting from this fact. New labels must be ordered from the manufacturer if necessary.
Prod.-No.: 189414389.R
Prod.-No.: 189414387.R
16
41200.L.R
TML 200R Lifting magnet
>600 kg from 10 mm S235
200 kg from 10 mm S235
160 kg from 10 mm S235
60 kg from 10 mm S235
20% - 50% of the load-bearing
capacity for flat material
50 - 400 mm
3.4 kg
-30°C to +60°C
-30°C to +60°C
>1320 lbs from 3/8"
440 lbs from 3/8"
352 lbs from 3/8"
132 lbs from 3/8"
20% - 50% of the load-bearing
capacity for flat material
2" - 16"
7.5lbs
-22°F to +140°F
-22°F to +140°F
Prod.-No.: 189414386.R
Prod.-No.: 189414377.R