MINOX DTC 1200 Manual De Instrucciones página 32

PLAYBACK MODE
While in the SETUP Mode, push the OK button to enter the playback mode. The following is a description of the control buttons in
Playback Mode.
CONTROL BUTTONS
OK
MENU
FURTHER SETTINGS
While in Playback Mode, push the MENU button to enter the menu for further settings. The following is a description of the control
buttons while in the further settings menu.
CONTROL BUTTONS
OK
MENU
SEND CURRENTLY SELECTED PHOTO (SEND)
Use the arrow buttons to navigate to SEND in the menu and verify with the OK button to send your selected photo to the MINOX Cloud.
DIAGNOSIS
Use the arrow buttons to navigate to DIAGNOSE in the menu and verify with the OK button to run a self-test of your trail camera. When
the diagnosis is complete, a file is stored on the SD card, which can then be made available to the MINOX Customer Service for further
analysis without having to send in the trail camera.
DELETE RECORDINGS
Use the arrow buttons to navigate to the menu items DELETE ONE or DELETE ALL and select the desired function with the OK button to
either delete the selected photo (ONE) or all (ALL) images on the SD card.
NIGHT RECORDINGS
For night shots, the infrared LEDs on the front of the trail camera provide the necessary light to capture images. The trail camera uses
infrared LEDs with a high wavelength to keep the amount of red light to an absolute minimum. The existing number of infrared LEDs
produces a wide beam of light to enable night shots at a distance of approx. 3 m to 15 m without overexposing the object. However,
reflective objects can cause an overexposure even within this range (e.g. road signs). Note that night shots are recorded in black and
white.
OPERATING PRINCIPLE OF THE MOTION SENSOR
As soon as wild animals or other objects move directly within the detection range of the motion sensor, the trail camera is
automatically activated and begins to take photos and/or record videos. If no further movements are detected for one minute after the
previous recording (adjustable in the app menu), the trail camera will return to standby mode.
Exit the Playback Mode
Enter the next mode for further settings
Scroll forward through existing recordings.
Scroll backward through existing recordings.
Select a menu item
Exit further settings (EXIT)
Scroll forward through the menu
Scroll backward through the menu
FUNCTION
FUNCTION
32