Operation And Functions - TaoTronics TT-BH092 Manual De Instrucciones

Ocultar thumbs Ver también para TT-BH092:

Guia de inicio rapido (11 páginas)

Contenido

Tabla de contenido

Idiomas disponibles

Single Earbud Mode

1. Take out one earbud from the charging case, and make sure the other one

is placed in the charging case and the lid is covered.

2. It will try to pair with the last paired device ﬁrst then enter pairing mode

with its LED indicator ﬂashing blue and white alternately if pairing failed.

3. Turn on the Bluetooth function on your device and search for nearby

devices. Find "TAOTRONICS SoundLiberty 92" in the searching results, tap

on the name to connect.

4. Once connected, the LED indicator will ﬂash blue slowly.

Note:

If you want to change to couple mode, simply take out the other earbud

from the charging case, they will pair with each other automatically.

Clear Pairing List

If you failed to pair your device with the earbuds, please clear the pairing

history as instructed below:

1. Put the earbuds back into the charging case, close the lid then open it.

2. Press and hold the Reset Button for 10 seconds until the LED indicators on

the earbuds and the charging case ﬂash white three times.

3. If you have paired your device with the earbuds before, remove

"TAOTRONICS SoundLiberty 92" from the Bluetooth device list and

pair again.

4. Re-pair with your Bluetooth® device as instructed in "Pairing" section.

Note:

If you want to pair the earbuds with another device when you have already

paired them with a device, deactivate the Bluetooth function on the paired

device or clear "TAOTRONICS SoundLiberty 92" from its Bluetooth list.

Restore the earbuds to factory settings as instructed above if pairing failed.