Shark GI460A Instrucciones De Uso página 5

OPERATING INSTRUCTIONS
Dry Ironing
All marked settings on the temperature dial can be used for dry ironing.
1. Plug the cord into a household electrical outlet (see page 3 for voltage
settings). The pilot light light will go "On", indicating that the iron is heating up.
2. Set Temperature Control Dial to desired temperature setting.
3. Place garment steamer/iron on its heel (on a stable, protected surface) while
iron is warming to desired temperature.
4. When the iron has reached the desired temperature, the pilot light will go "Off".
Emptying, Cleaning & Storing the Garment Steamer/Iron
Always empty and clean your garment steamer/iron after each use and before
storing.
1. Turn the temperature control dial to the "MIN" position
2. Unplug the power cord from the electrical outlet.
3. Empty the garment steamer/iron of all remaining water in the water reservoir.
4. Allow the unit to cool down before cleaning.
5. When the garment steamer/iron has cooled down completely, scale and other
residue can be wiped off the soleplate with a damp cloth.
6. Store the garment steamer/iron in the upright position.
WARNING! Use caution when emptying the garment steamer/iron.
Burns may occur from touching hot metal surfaces,
hot water or steam.
7
IRONING CHART
NOTE:
Before starting to iron or steam
delicate fabrics, it is best to first test the
temperature of the garment steamer/iron
on a hem or an inside seam.
DIRECTIONS
ON LABEL
SYNTHETIC
FIBERS, e.g.
acrylic, nylon
FABRIC
polyester
TEMP.
CONTROL
BURST
OF
STEAM
Set temperature
to "MAX"
To select garment steamer/iron
temperature, align temperature
selected on dial with the indicator
on the water tank.
SILK COTTON
WOOL LINEN
MIN MAX
• • • • •
•
8