Quick Start Guide - nedis HPDB200BK Guia De Inicio Rapido

a

Quick start guide

Wireless Headphones |
DAB+ / FM / Bluetooth®
For more information see the extended manual online:
ned.is/hpdb200bk
Parts list [Image A]
1 Display
2 Frequency + / skip to next
song
3 Frequency - / skip to previous
song
4 Menu / Enter button
5 Preset / Save button
6 Audio port (3.5mm)
7 Microphone
Charging the headphones
• Connect the USB cable to the micro USB port 8 .
The status indicator LED 9 on the headphones burns red to
indicate the headphones are charging.
The status indicator LED 9 on the headphones turns green when
the headphones are fully charged.
Switching on the headphones
•
Switch on the headphones by pressing q .
The display shows "Welcome to digital radio".
Switching mode
• While the headphones are switched on, repeatedly press q to
switch between DAB, FM tuning or Bluetooth mode.
The display shows what mode is currently selected.
DAB mode
• In DAB mode, press and hold w to search for available digital
radio stations.
The display shows the search progression in percentages.
After the search is finished, all available stations will
4
automatically be saved.
•
Press 2 or 3 to switch between the saved stations.
• Press 4 to confirm.
FM mode
1. In FM mode, press w . The display shows the current frequency.
2. Press and hold w to search for available FM radio stations.
After the search is finished, all available stations will
4
automatically be saved.
•
Press 2 or 3 to switch between the saved stations.
Bluetooth mode
Pairing the headphones to a Bluetooth audio source
1. While the headphones are switched off, press and hold q to
enter pairing mode.
The display shows "BT Connect".
HPDB200BK
8 Micro USB port
9 Status indicator LED
q Power / Mode button
w Info / Scan button
e VOL+ button
r VOL- button
2. Enable bluetooth on the device you want to pair the
headphones with.
3. Select "HPDB200BK" from the list of available Bluetooth devices
on your device.
The display shows "Connected".
If the headphones lose connection to the Bluetooth source,
4
they will automatically reconnect when back in range and
switched on.
Controlling the volume
• Press e to increase the volume.
•
Press r to decrease the volume.
Controlling the music
• Press 4 to play or pause the music
• Press 2 to skip to the next song.
• Press 4 to go back to the start of the song. Press again to go to
the previous song.
Making phone calls
With the headphones connected to a mobile phone via Bluetooth,
phone calls will automatically be redirected to the headphones.
When you receive an incoming phone call, the display shows
"Call in" and the phone will ring through the speakers of the
headphones.
• To answer an incoming call, press 4 . The display shows
"Calling".
•
To reject an incoming call, press and hold 4 for 2 seconds.
•
To end a call, press 4 .
•
To cancel an outgoing phone call, press 4 .
• To quickly redial the last called number, double press 4 .
Settings menu
•
Press and hold 4 for 2 seconds to enter the settings menu. Here
you can adjust the date and time, the display contrast and
brightness or perform a factory reset among other options.
Low battery alarm
When the battery is low, an audbile signal will be given through the
speakers and the display will show "Low power".
Switching off the headphones
• Press and hold q for 2 seconds to switch off the headphones.
Wired connection
When the batteries of the headphones are drained, you can still
listen to your audio source by connecting the headphones directly
to the audio source, using the 3.5mm audio cable.
Specifications
Product
Article number
Functions
4
Wireless Headphones | DAB+ / FM
/ Bluetooth®
HPDB200BK
DAB+ / FM / Bluetooth®