Elite CID12 Manual De Usuario página 28

TRIGGER SWITCH WITH VARIABLE SPEED
WARNING Never put adhesive tape on the trigger switch to achieve continuous high speed movement. In
such conditions the tool could fail, causing fires or personal injuries.
THIS TOOL IS CONTROLLED THROUGH A TRIGGER SWITCH:
• The speed of the drill depends on the quantity
of pressure applied to the trigger.
• The more pressure is applied, the faster
will rotate the drill.
• Decrease the pressure and the drill will decrease
your speed
SELECT ROTATION DIRECTION
• To select the forward rotation of the drill,
press the lock lever on the left trigger
right against the body of the drill.
• To select the backspace, press the lever
in the opposite direction.
• The central position locks the tool.
NOTE
Make sure you have released the trigger when changing the position of the lever. Always store the tool in
the locked / off position. Always check the direction of the drill rotation before using it.
TRIGGER
SWITCH
Rotation
direction
www.ELITETOOLS.co
Keep Working
10