General Safety Rules; Danger And Indicator Signals; Warning Signals; Danger Signals - Maschio PANTERA Empleo Y Mantenimiento

2.0 GENERAL SAFETY RULES

2.1 DANGER AND INDICATOR SIGNALS

The signs described are reproduced on the machine (Fig. 2). Keep
them clean and replace them if they should come off or become illegible.
Carefully read each description and learn their meanings by heart.

2.1.1 WARNING SIGNALS

1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and consult
the instruction booklet.

2.1.2 DANGER SIGNALS

4) Danger. Sharp objects could be thrown up. Keep a safe distance
from the machine.
5) Danger. Risk of injury to the legs.
Keep a safe distance from the machine.
6) Danger of injury to the hands. Never remove the guards while the
parts are mowing. Wait until all moving components have comple-
tely stopped..
7) Danger of dropping. Do not climb on to the machine.
8) Danger of getting hooked by the Cardan shaft. Keep away from
Cod. F20030252
DECALCOMANIE AVVERTIMENTO
WARNING STICKERS
ABZIEHBILDER MIT WARNHINWEISEN
DECALCOMANIE
CALCOMANIAS
7
14 10
5 4
21
La Ditta Costruttrice declina ogni responsabilità nel caso che i pittogrammi di sicurezza forniti a corredo della macchina
risultino mancanti, illeggibili o spostati dalla loro posizione originale.
cod. F07011081
USE AND MAINTENANCE
11 A
8
13
moving parts.
9) Danger of getting squashed during opening. Keep at a safe distance
from the machine.
10) Danger of getting squashed during closure. Keep at a safe distance
from the machine.
11) Pipes with high pressure fl uids. Take care if fl exible pipes break as
oil could spurt. Read the instruction manual.
13) Before engaging the pto, check that the rpm rate is that prescribed.
Never exchange the 540 rpm rate for 1000 rpm
14) Danger of being crushed. Do not get between the tractor and the
machine.

2.1.3 INDICATOR SIGNALS

16) Wear safety clothing.
17) Signs the hooking points for lifting.
18) Oil fi ll plug.
19) Oil drain plug.
20) Oil level plug.
21) Greasing point.
A) Identifi cation plate.
9 2
1
17
21
16
ENGLISH
18
OLIO SINTETICO
SYNTHETIC OIL
20
19
RIDUTTORE
SINGLE SPEED GEARBOX
BOITE MONO-VITESSE
UNTERSETZUNGSGETRIEBE
REDUCTOR
21
8 4
5
6
fi g. 2
EN - 39