Technical Data; Operating Conditions; Accessories - Cheyenne POWER UNIT I Instrucciones De Uso

Button/
Function
switch
Switch on Power Unit
(only PU I)
Switch off Power Unit
(only PU I)
Activate Tattooing machine 1
(only PU II)
Activate Tattooing machine 2
(only PU II)
Increase piercing frequency
Reduce piercing frequency
Start or stop the activated
tattooing machine
Switch on/off Power Unit
(only PU II)
LED Meaning of the lamp
The voltage supply is
Standby
connected to the PU.
Opera- The tattooing machine has
tion been started.
Power PU I is switched on.
22 EN
4.2

Technical data

Output voltage 6 to 12.5 V DC
Output power 5 VA
Power intake max. 6 VA
Piercing frequency 60 to 160 Hz
Operating mode Continuous operation
Dimensions
110 x 165 x 55 mm
(W x H x D)
Weight Approx. 260 g
Power Unit electrical connection
Input voltage 15 V DC
Power intake max. 6VA
Power supply plug electrical connection
100 to 240 V DC
Voltage supply
50 or 60 Hz
Output current max. 400 mA
4.3

Operating conditions

Ambient +10 to +35°C
temperature +50 to +95 °F
Relative humidity 30 to 75%
Air pressure 700 to 1070 hPa
4.4

Accessories

The following accessories
purchased from your local specialist
retailer:
• Cheyenne foot switch
• Cheyenne tattooing machines
• Cheyenne handles
• Cheyenne safety cartridges
• Cable adapters
• Protective sleeves for the handle
• Protective sleeves for the drive and
connection cable
Cheyenne Power Unit I & Power Unit II
can be