Franke Spar GN 86 M DH XS ARG Manual Del Usuario página 21

AUTO COOKING END
After the automatic cooking has been completed,
flashing on the screen and the buzzer alarm will sound. Any button
press will stop the alarm sound but the flashing symbol will go on till
button is pressed. The buzzer alarm will sound for 7 minutes if not
stopped.
POWER INTERRUPTS
After any interrupt of mains power, your oven will be inactive after the
power is restored, for safety reasons. After power on, the time of day
digits and symbol will flash and the time of day has to be adjusted.
(see:power on)
Note: The flashing
you have to enter the manual mode.
CHILD LOCK
This function is intented to prevent any unauthorized modification of
the timer settings. This function will be active, within 30 seconds after
the last button press.
for 3 seconds.
PROGRAMMABLE OPTIONS
Alarm tone:
Pressing and holding the
currenly valid buzzer tone being produced. By pressing
tons, you may scroll through 3 available buzzer tones. The last heard
buzzer tone will be automatically recorded as the selected tone. After
6 seconds of the last button press or by pressing
completed.
Brightness setting:
Pressing and holding the
currenly valid brightness setting being showed.By pressing
buttons, you may scroll through 8 available brightness setting. The last
seen brightness setting will be automatically recorded as the selected
setting. After 6 seconds of the last button press or by pressing
adjustment is completed.
Note: Default settings are highest.
Note: Programmable options are nonvolatile and will be resident after
any power failure.
symbol indicates that the oven is inactive and
will appear. To deactive it, press the
will disappear.
button for 3 seconds will result in the
button for 3 seconds will result in the
GB
21
symbol will be
button
and
, the adjustment is
and
but-
, the