Dometic PerfectRoof PR4500 Instrucciones De Uso página 47

PR4500
Step 5: Set the outer limit
➤ Keep pressing the
rect outer limit.
The fabric should lie loosely on the arms. Later on the back impulse after
extending the awning will apply the tension to the fabric.
I
NOTE
When you press a button for longer than 3 seconds, the awning
will keep moving even if you release the button. Briefly press the
button to stop the awning in the desired position.
Step 6: Complete the programming
➤ Press the
retract.
➤ Briefly press the
✓ The awning stops.
➤ Press and hold down the
briefly.
➤ Press the programming button (fig. 3 1, page 2) on the back of the
remote control.
✓ The awning briefly moves twice, indicating that the programming is com-
pleted. Now it can be retracted and extended again by pressing the
and buttons briefly.
➤ Reprogram the wind sensor, see chapter "Reprogramming the wind sen-
sor" on page 43.
➤ To check the awning function, see chapter "Retracting the awning" on
page 38 and chapter "Extending the awning" on page 37.
EN
or buttons until the awning moves to the cor-
and buttons simultaneously until the awning starts to
button.
button again until the awning moves twice
Adjusting the awning
47