EN
5. Temperature setting
Use the thermostat to set the desired temperature. The heating
pad switches on automatically when the thermostat is set to a
temperature, and the corresponding operating light will light up.
The heating pad shuts off and the operating light goes out if the
thermostat is set to "OFF".
Attention
Please ensure that the heating pad sits loosely, i.e. some air cir-
culates between the heating pad and your skin during use.
Accumulation of heat must be prevented. Never use the heating
pad without the cover.
6. Automatic off
The electric heating pad shuts off automatically after 90 minutes
of continuous use. This saves energy and provides additional
safety, because the heating pad is never used without supervisi-
on. The operating light will blink. In order to switch the heating
pad back on, first set the thermostat to "OFF" and then back to
the desired temperature.
After use please disconnect the power plug from the power out-
let.
18