Start-Up Operation; Temperature Setting - Soehnle COMFORT 2-ZONE Instrucciones De Manejo

EN
3. Placement of the heated mattress cover
Please ensure that the heated mattress cover is not pinched
or wrinkled.
1. Place the heated mattress cover directly on top of the mattress
and ensure that it is not located in the area of your head.
2. Place a fitted sheet over the heated mattress cover. It must be
completely smooth and wrinkle­free.
3. Do not wrinkle or bend any components in which or on which
electric wires, the power plug, or the power cord are located
and do not push these components underneath the mattress.
This could result in a malfunction of the heated mattress
cover as high temperatures could be generated, which in turn
will trigger the overheating protection of the device.
4. You can pinch your fitted sheet underneath the mattress as
usual.
Note
Please insert the plug into
the connector of the heated
mattress cover. Please ensure
that this connection is perfor­
med correctly and that the
plug is tight­fitting.
Use only original parts!
Do not attach any other control units!
16
068023_Comfort-2-Zone_5901-B_22-10-2014.indd 16-17

4. Start-up operation

This heated mattress cover is equipped with an internal thermos­
tat that regulates the temperature automatically and keeps the
heat at a constant level. This device will generate a comfortable
and safe heat. In order to switch the heated mattress cover on,
insert the plug into the power outlet and switch the device on.
Remark: Ensure that the thermostat is at the "OFF" position befo­
re connecting the heated mattress cover and switching it on. In
order to switch the heated mattress cover on and to set the desi­
red temperature, simply select that temperature on the thermos­
tat. When setting the temperature on the thermostat, the heated
mattress cover will switch on and the LED light will light up.
The heated mattress cover and the LED light will automatically
switch off when the thermostat is moved to the "OFF" position.
Note: Full heat will be generated faster if the heated mattress
cover is used with a bed cover.

5. Temperature setting

The controller has two separate
switchable heating zones ­ an upper
and a lower zone, which can be controlled
over repeatedly pressing the corresponding
Button.
0 OFF
1 Low temperature
Please select the lowest possible
temperature level if the device is
operated for more than one hour.
2 – 5 Medium temperature
6 High temperature, for pre­heating
the bed; not suitable for long­term
use.
EN
17
30
23.10.2014 13:06:48