Glow Fire Schiller Instrucciones De Montaje página 13

• In the next step, the black back wall (board 12) is used.
• Then screw the black ceiling plate 6 with the 4 black screws.
• The element 7 is available in two versions, each with a differently sized cutout. Choose the
right one for your water vapor cassette.
• You can now carefully insert the water vapor cassette into the recess. Due to the structural
properties of the fireplace insert in relation to the screws inserted on the side, slight
damage to the edge of the element 8 cannot be ruled out. This has no influence on the
optics and the function. Lack of lacquer, which occurs when inserting the cassette, is thus
excluded from any liability.
• Please note the further information regarding the operation of the water vapor cassette.
13
5th Step
Glow Fire Schiller
Stand: 08/2020
Version: 1.2