Router Safety Warnings; Mains Connection - Gude OF 1200 E Traducción Del Manual Original

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.

Router safety warnings

Wear ear protectors. Exposure to noise can cause
hearing loss.
Hold power tool by insulated gripping surfaces
only, because the milling cutter may contact its
own cord. Cutting accessory contacting a „live" wire
may make exposed metal parts of the power tool
„live" and could give the operator an electric shock.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control
Additional Safety and Working
Instructions
Use protective equipment. Always wear safety
glasses when working with the machine. The use of
protective clothing is recommended, such as dust
mask, protective gloves, sturdy non-slip footwear and
ear defenders.
Always use the protective shields on the machine.
Never reach into the danger area of the machine
when it is running.
Chips and splinters must not be removed while the
machine is running.
Only use tools whose permitted speed is at least as
high as the highest no-load speed of the machine.
Only use professionally grinded router cutters.
Only use router cutter with correct shank diameter.
Put the router back to original position after usage
(loosen clamping lever to secure cage).
Only move the workpiece in counter rotation to
cutter (only work oppositely oriented)! For security,
use devices such as safety- and pressure device, guide
slide, rip fence, etc.
The dust produced when using this tool may be
harmful to health. Do not inhale the dust. Use a dust
absorption system and wear a suitable dust protec-
tion mask. Remove deposited dust thoroughly, e.g.
with a vacuum cleaner.

Mains Connection

Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to
connect to sockets without an earthing contact as
the design conforms to safety class II.
Only plug-in when machine is switched off.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
ENGLISH
15