Using Your Remote; Code Identification - GE RM24926 Manual De Instrucciones

Using Your Remote

Code Identification

The Code Identification Feature allows you to identify
the four digit library code stored under your device
button. For example, if you want to find out what
four digit code is stored under your TV device button,
follow the six steps below:
1. Press and hold the CODE SEARCH button
until the red indicator stays on. Release
the CODE SEARCH button.
2. Press and release the desired
device button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the CODE SEARCH
button. The red indicator blinks once and
remains lit.
4. To find the first digit for
the code stored under
the device button
pressed in step 2, press
each numeric button
from 0-9 in turn. The
number that causes
the indicator light to
blink is the first digit in
your code.
5. To find the second digit, repeat step 4.
6. Repeat step 4 to find the third and fourth digit.
This time the red indicator turns off and stays off.
11